广西华工重工升降设备厂
多年以来一直专注于生产销售液压升降机械设备
全国24H热线服务电话：
188-7888-1055
广西华工重工升降设备厂
多年以来一直专注于生产销售液压升降机械设备
全国24H热线服务电话：
188-7888-1055
升降货梯http://www.iyunsun.com/上安装螺母的部位，有时并不是足够宽裕，且拧螺母的扳手的空间也相当狭小。六角形的螺母，一次只需要把扳手扳动60度，就能够慢慢把螺母拧紧，为了拧紧螺母所需要留出的地方，六角形更小，因此六角形螺母使用起来最为方便。
Freight elevator on the site of the mounting nut, sometimes not enough well-off, and tighten the nut wrench space is quite small. Hexagonal nut, one just need to flip the lever 60 degrees, it is possible to slowly tighten the nut,tighten the nut to the desired place set aside, hexagonal smaller, and therefore the most convenient to use the hexagonal nut.
再看看升降货梯http://www.iyunsun.com/扳手，普通扳手的柄与扳口都可以成为30度的夹角，这样当升降货梯上安装螺母的地方十分狭窄，扳手也不可以自由活动时，而六角螺母，只要将扳手扳动一个螺母，再把扳手翻过来再扳一次螺母，这样来回反复地扳几次，就可以把螺母拧紧了。
Look at cargo lifter wrench, a common wrench handle and pull the port can become an angle of 30 degrees, so that when the nut is installed on local cargo lift very narrow, not when the wrench can be free, and hex nuts, as long as the wrench flip a nut, then turn it over and then pull a wrench nut, so pull back and forth several times repeatedly, you can put a nut tightened.
公司名称：广西华工重工升降设备厂
联系人：郑经理
手机号：18878881055
座机：0771-3366627
邮箱：584649766@qq.com
地址：广西南宁市青秀区仙葫经济开发区开天路23号
手机移动端
微信扫一扫